This page has several large images and takes a while to load.
Place mouse over each image for more information.

zapper wrist straps


The measurements shown are current flow which is why these waves do not appear square
This is to show the difference in current applied which is significant
Using the 4 point contact system with 3 points positive is much better.

Copper Paddles Wrist Straps
Using paper towels wetted with saline solution improves signal at 2500Hz
Even with saline soaked paper towels at 2500Hz wrist straps are not as effective. Note the high spikes which indicate loss of high frequencies which are important.

The signal from the wrist straps is not as good

For optimal results use the copper footpads with copper paddles

proper_current_measurement Current measuring criteria
ParaZapper and ParaZapper PLUS only

Current measured across R1 gives 1% accuracy.
output = 1 volt / milliamp current.
Measurements made with Tektronix Model 464 Storage scope.
Vertical set at 2.0 Volts per div.
Horizontal set at 50 microsec per Div for 2500 Hertz range.

Horizontal set at 5 microsec per Div for 30000 Hertz range.
Using a multimeter or milliamp meter does not produce correct results as the signal is a square wave, not a DC or an AC current.

This page copyright Para Systems. Inc

Hulda Clark Zapper
Colds and Flu
Hulda Clark
Best Zapper

ParaZapper is a trademark of
Para Systems, Inc.
416 Dobbins Rd.
Boaz, AL 35956 USA
All rights reserved.